Panasonic CY-TV7000W Service Manual page 13

Adjustment No.Adjustment
Item Point
SUB 7 Remote
BRIGHT B Controller
COM AMP 8 Remote
Controller
COLOR 9 Remote
Controler
Test Point
TP982 (G) Adjust the remote-controller so that BP of
/ TP981 (B) each color is same.
/ TP952
(VGL) /
TP984
(VGND)
TP952 Adjust the remote-contoroller so that
(VGL) / amplitude of two waveforms is same.
TP984
(VGND)
TP982 (G) Adjust the remote-controller so that
/ TP952 amplitude of two waveforms is same.
(VGL) /
TP984
(VGND)
13
Adjustment Method Remarks
Color Bar Signal
Generator / Chroma
Signal:OFF / White
Level:100% / Apply
trigger at TP952.
Notes:
1. Use coonnection
select test points.
2. Waveform should
adjusted in center
Color Bar Signal
Generator / Chroma
Signal:OFF / White
Level:75% / Apply
trigger at TP952.
Notes:
1. Waveform should
adjusted in center
Color Baar Signal
Generator / Chroma
Signal:ON / White
Level:75% / Apply
trigger at TP952.
Notes:
1. Repeat steps 9 and
the standards are satisfied.
2. Waveform should
adjusted in center