Table of Contents
Advertisement
e.) Save setting to EEPROM
Procedure :
Push Up / Down / Left / Right at the same time.
If there key inputs are accepted, all LEDs light orange.
Besides, these settings are saved automatically when turning off the projector.
Notes :
If settings are valid, the burn in mode will start when the projector becomes the
standby mode. Test patterns during the burn in mode are rotated on white, black,
red, green and blue solid fields. The On LED blinks during the burn in mode.
Pushing the return key will cancel execution of the burn in mode.
When the burn in mode finishes, the projector becomes the standby mode
automatically.
3-13
Toshiba Series
Advertisement
Table of Contents
