Table of Contents
Advertisement
2. Return the main unit to the normal position and extend the
carrying handle.
3. Unscrew the 2 screws.
4. Lift the upper cover and disconnect the 2 connectors from the
speakers.
5.3. Removal of A-Module
Notes:
- If replacing A-Module, read the microcomputer and gamma data
from the old module and write it in the new one according to the
section 6.5. "Software for Adjustment". (If not, remove IC1041 and
IC1036 from the old module and replace them on the new module.)
- If replacing A-Module, adjust the Input Level according to the
chapter 6 "Measurement and Adjustments".
1. Remove the upper cover according to the section 5.2. "Removal of
Upper Cover".
8
Advertisement
Table of Contents
