Panasonic KX-FB423CN Manual page 264

DISPLAY MESSAGE
· The ink film is empty. Replace the ink film with a new one. (Refer to INK FILM - INSTALLING /
· The ink film is not installed. Install it. (Refer to INK FILM - INSTALLING / REPLACING (P.25).)
· The ink film is slack. Tighten it. (Refer to INK FILM - INSTALLING / REPLACING (P.25).)
· The fax machine is installed near appliance such as TV or speaker which generate an intense magnetic
· A recording paper jam occurred. Clear the jammed paper.
· The unit is checking that there is no slack on the ink film. Wait for a moment while the check completes.
· The other party's fax machine does not provide the polling function. Check with the other party.
· The other party´s fax machine is busy or has run out of recording paper. Try again.
· The document is jammed. Remove the jammed document. (Refer to DOCUMENT JAMS - SENDING
· [Alternately, turn off service code #559 to enable sending of documents longer than 600 mm] (Refer to
· A transmission error occurred. Try again.
· The unit is too hot. Let the unit cool down.
REPLACING (P.25).)
field.
[If the printout jams, please refer to RECORDING PAPER JAM (P.16).]
(P.27).)
SERVICE FUNCTION TABLE (P.55).)
CAUSE AND REMEDY
53
KX-FB423CN