Panasonic KX-FB423CN Manual page 226

3.3.5. SETTING YOUR LOGO
The logo can be your company, division or name.
1 Press [MENU].
2 Press [ ] or [ ] until the following is displayed.
3 Press [SET].
4 Enter your logo, up to 30 characters, using the dial keypad.
Example: "BILL"
1. Press [2] 2 times.
· Cursor ( ) will appear on the display.
2. Press [4] 6 times.
3. Press [5] 6 times.
4. Press [ ] to move the cursor to the next space and press [5] 6
times.
5 Press [SET].
· The next feature will be displayed.
6 Press [MENU].
Note:
· You can enter your logo by pressing [+] or [-] in step 4. In
this case, press [ ] to move the cursor.
To correct a mistake
Press [ ] or [ ] to move the cursor to the incorrect character,
and make the correction.
To delete a character
Press [ ] or [ ] to move the cursor to the character you want
to delete and press [STOP].
To insert a character
1. Press [ ] or [ ] to move the cursor to the position to the
right of where you want to insert the character.
2. Press [HANDSET MUTE] to insert a space and enter the
character.
15
KX-FB423CN