D-Link Nuclias Connect AC1200 Quick Installation Manual page 6

Mounting on a Solid Wall
Figure 7: Attaching the Mounting Plate
1. Use the mounting plate to mark the
location where to drill the holes in the wall.
2. Drill holes on the markings and place the
included anchors into the drilled holes.
3. Align and place the mounting plate on top
of the anchors and use the included screws
to secure the mounting plate to the surface.
Figure 8: Mounting the Device
4. Align and slide the DAP-3666 down so
that the mounting plate securely locks to
the DAP-3666.
4
Securing the Mount Screw and
Connecting the Grounding Wire
Figure 9: Attaching the Mount Screw
1. Use the included mount screw (hexagonal
hole) to lock the DAP-3666 to the pole/
wall mount.
Figure 10: Securing the Mount Screw
2. With the included hexagon socket
spanner, tighten the mount screw until
the DAP-3666 is secured.
DAP-3666 Quick Installation Guide