Contec DIG-100M1002-PCI User Manual page 58

Procedure
(1) First select a radio button, either "Perform setting newly" or "Edit a configuration file exists".
Select an object device in the case of "Perform setting newly", or specify the path of a configuration
file in the case of "Edit a configuration file exists", then click the "Next" button.
(2) Follow the screen to perform settings on the following pages.
The following contents can be set.
- Operation mode setting
- Abort factor setting
- Digital filter setting
- Event controller unit connection setting
- Horizontal axis setting
- Vertical axis setting
- Trigger setting
- Waveform judgment setting
The display is grayout when the setting cannot be done by the combination.
For more details on the setting contents, refer to "API-DIG(WDM) HELP".
(3) Specify the path to save the file on the last page. Then the configuration file is created in the
specified path when the "Finish" button is clicked.
Complete the operation without creating a configuration file by clicking the "Cancel" button.
DIG-100M1002-PCI
5. About Software
51