Canon Satera LBP3900 User Manual page 40

CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
The multi-purpose tray can be loaded with up to the number of sheets listed below.
•
Make sure that the paper stack does not exceed the load limit guides.
- Plain paper : Approx. 100 sheets (Ex. 64 g/m
- Heavy paper : Approx. 50 sheets (Ex. 128 g/m
- Transparency : Approx. 50 sheets
- Label : Approx. 40 sheets
Load the paper so that it is straight.
•
If the rear edge of the paper stack is not properly aligned, this may result in
•
misfeeds or paper jams.
If the paper is curled or folded at corners, flatten it before loading it in the printer.
•
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
•
once. In this case, fan the paper thoroughly, and then align the edges of the stack
on a hard, flat surface.
When printing from LIPS LX Printer Driver, you can load paper either in portrait or
•
landscape orientation. However, when printing custom size paper of its long edges
312.0 mm or less, load the paper in landscape orientation. When you are not
printing from LIPS LX Printer Driver, load the paper in portrait orientation.
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the proper
orientation according to the following instructions:
( : Feeding direction)
2
)
2
)
39