When Loading Custom Size Paper - Canon Satera LBP3900 User Manual

6
Set the paper cassette in the printer at an angle as shown in
the figure
gently and horizontally
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.

When Loading Custom Size Paper

Perform the following procedure to load custom size paper.
IMPORTANT
You can load paper of the following custom paper sizes.
•
- When loading paper in portrait orientation: Width 210.0 to 297.0 mm; Length 210.0 to
431.8 mm*
* When loading paper that is 279.5 to 297.0 mm wide in Cassette 1, the paper length
should be 210.0 to 420.0 mm.
- When loading paper in landscape orientation (only when LIPS LX Printer Driver is
used): Width 210.0 to 297.0 mm; Length 148.0 to 297.0 mm
When custom size paper is loaded, specify the setting for <
•
> as follows.
ズ
26
, then push it into the printer or paper feeder
a
Cassette 1
a
b
CAUTION
When setting the paper cassette in the printer, be careful not to catch your
fingers.
.
b
Cassette 2
a
b
カセット N（N=1、2）用紙サイ