Correction Of The Tape Width - JUKI AMS-210ENHL2210/TF10S Instruction Manual

4-4. Correction of the tape width

In the case the tape is fed before the sewing machine completes the preparation for sew-
ing, the tape travel guide will move to cause the tape to be caught in the guide. If the tape
is fed before the sewing machine completes the preparation for sewing, draw out the tape
once from the tape travel guide. Then, wait until the sewing machine completes the prepa-
ration for sewing and re-feed the tape.
① Displaying the tape width correction screen
When TAPE WIDTH CORRECTION button
pressed, the tape width correction screen is displayed.
② Correcting the tape width
When button
according to the value entered. Once the tape width correction
value is determined, press ENTER button
The tape width correction procedure is completed and the tape
width correction screen is closed.
– 60 –
is pressed, the feeder operates
.
is