Table of Contents
Advertisement
10.ADJUSTMENT PROCEDURE OF FRONT-UP AMOUNT OF THE PRESSER FOOT
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
When sewing a thick rubber sheet or the like together, fabric can be smoothly fed by raising the front of
presser foot ❶ . Loosen nut ❷ , turn setscrew ❸ to the right (clockwise), and raise the front ❶ of presser
foot for adjustment.
11.ADJUSTMENT PROCEDURE OF THE POSITION OF THE TAPE GUIDE
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
Loosen setscrew ❹ , and move tape guide base ❺ to the right and left to adjust the position of the tape.
12.ADJUSTMENT PROCEDURE OF THE WIDTH OF THE TAPE GUIDE
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
Loosen setscrew ❼ move tape guide ❻ to the right and left to adjust the width of the tape.
13.ADJUSTMENT PROCEDURE OF THE FABRIC PRESSER
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
Loosen setscrew ❽ and adjust the knife cutting position so that moving knife enters between knife guide ❾ .
❽
❶
❷
❸
❹
❾
❼
– 7 –
❺
❻
Advertisement
Table of Contents
