Canceling Printing - Canon LBP-2710 User Manual

Canceling Printing

To cancel printing currently being processed, follow the procedure described below
to perform job cancel. Job cancel lets you cancel a job while data is being received
or processed. It does not affect the print data for the next job or any other interface
jobs for which data processing has not begun.
IMPORTANT
•
•
•
NOTE
•
Follow the procedure described below to perform job cancel. Only perform job
cancel when the
you want to cancel is being received or processed).
1
オンライン
Press [
The
using the control panel.
NOTE
•
Perform job cancel offline when data is being processed (when the
is on or flashing). If you press
cancel cannot be performed.
Data that has already been processed and is currently being printed (when paper
feeding has begun) cannot be canceled. In this case, be careful because
performing job cancel may cancel the print data for the next job.
If print data sent from a printer driver not compatible with this printer is mixed with
other data, multiple print jobs may be canceled.
When job cancel is performed, the message
However, the print job data may not be canceled. You cannot cancel secure job
data before entering a password, or job data to be stored in the box. If you want to
cancel secure job data and job data stored in the box, delete them by using the
Remote UI (standard for LBP-2810 only) or NetSpot.
indicator is on or flashing (when the print data for the job
ジョブ
].
オ オ オ オ ン ン ン ン ラ ラ ラ ラ イ イ イ イ ン ン ン ン
indicator is turned off and the printer gets ready for operation
オンライン
The display changes depending on the printer status. During job processing, the
operation mode is shown on the upper part of display, a user name and print status
are shown on the lower part of the display.
when the
[ ジョブキャンセル ]
<03 ジョブ キャンセル>
indicator
ジョブ
indicator is off, job
ジョブ
is displayed.
65