5 Canceling Printing; Outputting The Data (Forced Printing) - Canon Laser Shot LBP-950 User Manual

5 5 5 5 5
Canceling Printing
When you cancel printing from your PC but some data has already been sent to the printer,
you can stop all printer activity and operations and cancel printing by outputting the data.
Outputting the Data
Printing data will be left in the printer's memory and the job will not be properly completed if
the printer receives less than a page of printing data, the printer is taken off-line during
printing or you cancel printing from your PC. If this happens, the printer will not be able to
receive new printing data and will not be able to print. When there is printing data in the
printer's memory or a job is not finished, follow the instructions below to output the data.
1
Press the オンライン key to turn off the オンライン indicator.
▼ Setting can be carried out using the operation panel.
2
Press the 排出 key.
▼ The message [05 ハイシチュウ] is displayed and any data that is still in the
• When you output data, printing data currently in progress will be erased.
Print the data again from your PC.
• When there is data remaining in the printer's memory or the job will not
finish even though there is no printing data, the ジョブ indicator comes on.
• When the job time-out has been set and the time elapses, data less than
one page in length will be automatically printed. The job time-out factory
setting is [30 ビョウ].
• If the ジョブ indicator does not come off after you have output the data,
carry out a soft reset. (→ p. 37)
オンライン
ユーティリティ
排 出
memory will be printed.
オンライン
ユーティリティ
排 出
リセット / 実行
• If you press the 排出 key or the オンライン key while the data is
being output, the process will be canceled. However all data on the page
where output was canceled will be lost.
(Forced Printing)
動作モード
セットアップ
リセット / 実行
動作モード
セットアップ
00 ｲﾝｻﾂ ｶﾉｳ A4
ﾊｲｼ ﾄﾚｲ
05 ﾊｲｼﾁｭｳ
35