Electrical Connections; Terminal Block M1; Terminal Block M2 - Baxi LUNA DUO-TEC Instruction Manual

SINGLE SPLITTING KIT
single splitting kit (C
"SECTION" D

11. ELECTRICAL CONNECTIONS

Use a double-pole switch with a contact separation of at least 3 mm.
a relay between the accessories and the electronic board.
disconnected from the power supply. Respect the input polarity on terminal block M1: L (LINE) - N (NEUTRAL).

TERMINAL BLOCK M1

(L) Live
(N) Neutral
Earth
(1) (2) Room Thermostat.
Put back the jumper on terminals 1-2 of boiler terminal
block M1 if the room thermostat is not used or if the
installed.

TERMINAL BLOCK M2

Terminals 1 - 2:
Terminals 4 - 5 (common):
Terminals 3-6-7-8: not used.
Terminals 9-10:
Use the relative cable grommets at the bottom of the boiler to thread the cables through to the terminal blocks.
7213077.01 (2-08/14)
"SECTION" B
30
2