10. INSTALLING THE DUCTS
WARNINGS
individual accessories.
C53
C63
positioned over the joints at a distance of approximately 1 metre from one another.
10.1 CONCENTRIC DUCTS
A 90° bend reduces the total duct length by 1 metre.
A 45° bend reduces the total duct length by 0.5 metres.
D at the end of this manual).
Make sure there is a minimum downward slope of 5 cm per metre of duct towards the boiler.
"SECTION" D
10.2 SEPARATE DUCTS
B) and an air duct adaptor (A
from the cap.
100 Pa
29
7213077.01 (2-08/14)