Power Cord; Power Button - Bissell ZING 10M2 Series User Manual

O
perations

Power cord

The power cord is located at the rear
of the vacuum. Gently pull out the
power cord, watching for the yellow
line. Stop pulling the power cord once
the yellow line is visible. There is also
a red line, which indicates the end of
the usable cord. Do not pull the power
cord out beyond the red line.
Automatic cord rewind
Your vacuum is equipped with an
automatic cord rewind. When cleaning
is finished, press the power button
OFF and grasp the plug to disconnect
from the electrical outlet. Hold the
plug and press the automatic cord
rewind button to rewind the cord
automatically.

Power button

Turn the power ON or OFF by pressing
lightly downward on the power button
( ).
6
w w w . b i s s e l l . c o m
Automatic Cord
Rewind Button
CAUTION:
Be careful to avoid injury as
cord retracts very quickly.
Power Button
CAUTION:
Before using your vacuum,
make sure that the dirt cup
and all filters are in place.
Do not operate your vacuum
without the dirt cup and filters.
8 0 0 . 2 3 7 . 7 6 9 1