Please Do Not Return This Product To The Store - Bissell SPOTBOT 88D6 Series User Manual

T
roubleshooting
Cleaner will not run
Possible Causes
1. Power cord not plugged in.
2. Vacuum flex hose not removed from receiver.
Unusual or Odd Noise
Possible Causes
1. Clean/solution tank is out of fluid.
Reduced or No Spray
Possible Causes
1. Spray tip clogged on Tough Stain Brush.
2. Clean/solution tank is out of fluid.
3. Clean/solution tank is not inserted
into the unit securely.
No Suction
Possible Causes
1. Dirty/collection tank is full.
2. Dirty/collection tank latch is not down.
3. Black valve on the dirty/collection
tank is missing.
Other maintenance or service not included in this manual should be performed by an
Thank you for selecting a bISSEll product.

Please do not return this product to the store.

w w w . b i s s e l l . c o m
Manual/Hose Cleaning
authorized service representative.
Remedies
1. Check electrical plug.
2. Remove vacuum flex hose.
Remedies
1. Fill clean/solution tank.
Remedies
1. Clean spray tip.
2. Fill Clean/solution tank.
3. Gently press the clean/solution
tank until you see "bubbles"
coming from the base of the tank.
Remedies
1. Empty dirty/collection tank.
2. Push latch down securely
into place.
3. Replace black valve into dirty/
collection tank.
13