Removal Of Electrical Box - Daikin 4MKD90BVM Service Manual

Removal of Electrical Box

3. Removal of Electrical Box
Procedure
Step
Remove the outer panels
such as top and front
panels.
The figure shows the
1
right side view.
1. Remove the tie wire.
1 Loosen the terminal
board screws, and
remove the wires at A
and B ports.
Open the terminal
2
board cover, and
remove the wires at C
and D ports.
6
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Power terminal board
(L) - White
PC board for servicing
(N) - Black
A port B port
C port D port
Wiring fixture
Match the colors of the tie
wires to A, B, C and D ports
as follows.
(1) - Black
(2) - White
(3) - Red
Wires are fixed to the
Earth terminal
screw
terminal board with screws.
(R2219)
(R2220)
When reassembling,
reconnect the wires to C and
D ports.
Terminal
board
cover
(R2221)
Si12-796
Points
Power
Power
Transmission
Removal Procedure