M
aintenance and care
Maintaining TurboBrush
The TurboBrush should be checked
regularly for clogs or debris wrapping
around the brush.
1. Unplug the vacuum from electrical
outlet.
2. Remove TurboBrush tool from the end of
hose.
3. If a clog is present or debris is visible,
unscrew the two screws on the back of the
TurboBrush to remove the faceplate and
clear any obstructions.
4. To clean debris from the brush, remove the
brush from the drive belt and clean debris.
5. Reposition the drive belt on the brush.
Place ends of brush in slots on sides as
shown. Reposition faceplate and secure
with two screws.
14
w w w . b i s s e l l . c o m
2.
4.
8 0 0 . 2 3 7 . 7 6 9 1