Troubleshooting; Please Do Not Return This Product To The Store - Bissell EASYVAC 23T7 SERIES User Manual

T
roubleshooting
Vacuum cleaner won't run
Possible causes
1. Vacuum cleaner is not plugged in
2. Blown fuse/tripped breaker
Vacuum cleaner won't pick up dirt
Possible causes
1. Dirt cup is full
2. Filter dirty
3. Hose not secure
4. Dirt cup not in place
5. Vacuum path clogged
6. Rotating power brush drive belt broken
7. Drive belt stretched
8. Floor brush bristles worn
9. Floor brush jammed
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of service.
w w w . b i s s e l l . c o m
Contact us directly at 1-800-237-7691.
WarNINg:
To reduce the risk of electric shock, turn power OFF
and disconnect plug from electrical outlet before
performing maintenance or troubleshooting.
remedies
1. Check electrical plug
2. Check/replace fuse or reset breaker
remedies
1. Empty dirt cup
2. Check, remove debris or clean
3. Check to be sure hose is snapped into place at both ends
4. Make sure dirt cup is fully inserted and dirt cup
release handle is pushed in completely
5. Visually check air passageway, hose inlet,
and hose for anything that might be obstructing.
the vacuum path. Carefully remove blockage
6. Replace drive belt
7. Check drive belt area and remove obstructions
Replace drive belt if necessary
8. Replace floor brush
9. Remove floor brush and clean debris from
brush and ends Check drive belt for any damage
8 0 0 . 2 3 7 . 7 6 9 1
13