Style Playback Variations; Style Sync Stop; Turning Each Style Track On/Off - Yamaha PSR-E473 Owner's Manual

Playing with Rhythm and Auto Accompaniment (Styles)

Style Playback Variations

Styles have Intro, Main A/B, and Ending sections.
The Main A section is played as default pattern, but
you can add variations to a performance by switching
sections. The operations for switching to each sec-
tion are described below.

Intro:
While playback is stopped, press the [INTRO/
ENDING/rit.] button. When playback starts, after
the Intro finishes, it automatically switches to
either Main A or Main B.

Main A/B:
Press the [MAIN/AUTO FILL] button. If playback
is stopped, it switches between Main A and Main
B. If during playback, an Auto Fill is inserted
when switching between Main A and Main B.
Stopped
Playing
back
Auto Fill:
A short, dynamic riff or rhythmic break is inserted
automatically when switching between Main A
and Main B.

Ending:
During playback, press the [INTRO/ENDING/rit.]
button.
The Section switches to the Ending. When the
Ending finishes, Style playback stops automati-
cally.
You can have the Ending gradually slow down
(ritardando) and end, by pressing the [INTRO/
ENDING/rit.] button again while the Ending is
playing back.
32
PSR-E473, PSR-EW425 Owner's Manual
INTRO≥A
Section after Intro
(Main A or Main B)
MAIN A
Selected section
(Main A or B)
FILL A≥B
ENDING
Adjusting the Volume of the Style
You can adjust the volume balance between Style
playback and your keyboard performance. Adjust it in
the Function Settings (page 63, Function 031).
Changing the Tempo
Refer to "Changing the Tempo" on page 23.

Style Sync Stop

When you press the [SYNC STOP] button to turn on
this function, the Style will only play while pressing
chords in the Auto Accompaniment area of the key-
board. Releasing all the notes will stop Style play-
back. Press the [SYNC STOP] button again to turn it
off.
80sGtPop
001
NOTE
This function can be used when ACMP is turned on.

Turning Each Style Track On/Off

A Style consists of multiple tracks. To play back or
mute specific tracks, use the TRACK CONTROL but-
tons to turn individual tracks on and off.
Track on/off status is shown
in the display (page 22)
NOTE
Up to two Track buttons can be pressed simultaneously when
turning Tracks on or off.
Appears when the Sync
Stop function is on.