Precautions - Sony CYBER-SHOT DSC-S70 Service Manual

All manuals and user guides at all-guides.com
Changing the recorded still Copying images (COPY)
image size (RESIZE)
You can copy images to another
"Memory Stick."
In single mode
1
Set the MODE selector to
PLAY and display the image
to resize.
2
Select [TOOL] and then
1
[RESIZE] from the menu.
3
Select the desired image
size.
2
2048× 1536, 1600× 1200,
×
1280 960, 640× 480
The changed image is recorded,
3
then the display returns to the
image display before resizing.
To return to the original size
Select [CANCEL] in step 3.
4
Notes
• You cannot change the size of images
recorded in TEXT mode or uncompressed
images.
• When you change from a small size to a
large size, the picture quality deteriorates.
• The original image is retained even after
To copy the image to another "Memory
resizing.
• The resized image is recorded as the
Stick"
newest file.
Select [CONTINUE] after step 4 and
insert a new "Memory Stick."
Notes
If you do not select [EXIT] after
"COMPLETE" appears and instead insert a
new "Memory Stick," the same image is
copied again.
4
Selecting still images to print
(PRINT MARK)
You can mark a print mark on still
images recorded with your camera.
This mark is convenient when you
have images printed at a shop that
conforms with the DPOF (Digital Print
Order Format) standard.
To unmark selected print marks
Select the images to unmark in step 3
with the control button, then select
[ENTER].
To unmark all the print marks
Select [FILE], [PRINT MARK],
[ALL] and then [OFF] from the menu.
In single mode
1
Set the MODE selector to
Notes
PLAY and display the image
• You cannot mark moving images or
you want to print.
images recorded in TEXT mode.
2
Select [FILE], [PRINT MARK], • If you mark an image recorded in TIFF
and then [ON] from the menu. mode with a print mark, only the
uncompressed image is printed, and the
The (print) mark is displayed
JPEG image recorded at the same time is
on the image.
not printed.
To unmark the print mark
Select [OFF] in step 2.
In INDEX mode
1
Set the MODE selector to
PLAY, then display the INDEX
screen.
2
Select [FILE], [PRINT MARK],
and then [SELECT] from the
menu.
3
Select the images to mark
with the control button.
Set the MODE selector to
PLAY, then display the image
to copy.
Select [TOOL], [COPY], and
then [OK] from the menu.
"FILE ACCESS" appears.
When "CHANGE MEMORY
STICK" appears, eject the
"Memory Stick."
"INSERT MEMORY STICK"
appears.
Insert the "Memory Stick" on
which to copy the image.
"RECORDING" appears. When
copying is completed,
"COMPLETE" appears.
To end copying, select [EXIT].
51
Select [ENTER].
of the selected images change
from green to white.
of all images are unmarked.
53
– 27 –
Notes
In INDEX mode
• If you do not select [EXIT] after
"COMPLETE" appears and instead insert
a new "Memory Stick," the same image is
copied again.
• You cannot copy uncompressed images.
• You cannot copy images that are bigger
than 5 MB at once. If "NOT ENOUGH
MEMORY" appears or
INDEX screen, cancel some images to
copy and try again.
1
Set the MODE selector to
PLAY, then display the INDEX
screen.
2
Select [TOOL], [COPY], and
then [SELECT] from the
menu.
3
Select the image to copy.
The (select) indicator appears
on the image.
4
Select [ENTER].
"MEMORY STICK ACCESS"
appears.
5
When "CHANGE MEMORY
STICK" is displayed, eject the
"Memory Stick."
"INSERT MEMORY STICK"
appears.
6
Insert another "Memory
Stick."
"RECORDING" appears. When
copying is completed,
"COMPLETE" appears.
To end copying, select [EXIT].
To copy the image to another "Memory
Stick"
Select [CONTINUE] after step 6 and
insert a new "Memory Stick."
To cancel copying part-way
Change the MODE selector setting or
turn off the power.
52
Additional information How to prevent moisture
condensation
When bringing the camera from a cold place

Precautions

to a warm place, seal the camera in a plastic
bag and allow it to adapt to conditions at the
On cleaning
new location over a period of time (about an
hour).
Cleaning the LCD screen
If moisture condensation occurs
Wipe the screen surface with a cleaning
Turn off the camera and wait about an hour
cloth (not supplied) or a LCD cleaning kit
for the moisture to evaporate. Note that if
(not supplied) to remove fingerprints, dust,
you attempt to record with moisture
etc.
remaining inside the lens, you will be
Cleaning the camera surface
unable to record clear images.
Clean the camera surface with a soft cloth
slightly moistened with water, then wipe the
On AC power adaptor
surface dry. Do not use any type of solvent
such as thinner, alcohol or benzene as this
• Unplug the unit from the wall outlet
may damage the finish or the casing.
(mains) when you are not using the unit for
After using your camera at the a long time.
seashore or other dusty locations • To disconnect the power cord (mains lead),
pull it out by the plug. Never pull the
Clean your camera carefully. Otherwise, the
power cord (mains lead) itself.
salty air may corrode the metal fittings or
• Do not operate the unit with a damaged
dust may enter the inside of your camera,
cord or if the unit has been dropped or
causing a malfunction.
damaged.
• Do not bend the power cord (mains lead)
Note on operating
forcibly, or place a heavy object on it. This
temperature
will damage the cord and may cause fire or
electrical shock.
Your camera is designed for use between the • Prevent metallic objects from coming into
temperatures of 32˚F and 104˚F (0˚C and
contact with the metal parts of the
40˚C). Recording in extremely cold or hot
connecting section. If this happens, a short
places that exceed this range is not may occur and the unit may be damaged.
recommended.
• Always keep metal contacts clean.
• Do not disassemble the unit.
• Do not apply mechanical shock or drop the
On moisture condensation
unit.
• While the unit is in use, particularly during
If the camera is brought directly from a cold
charging, keep it away from AM receivers
to a warm location, or is placed in a very
and video equipment. AM reception and
damp room, moisture may condense inside
video operation are disturbed.
or outside the camera. Should this occur, the
• The unit becomes warm during use. This is
camera will not operate properly.
not a malfunction.
• Do not place the unit in locations that are:
Moisture condensation occurs
— Extremely hot or cold
easily when:
— Dusty or dirty
• The camera is brought from a cold location
— Very humid
such as a ski slope into a warmly heated
— Vibrating
room.
• The camera is taken from an air-
conditioned room or car interior to the hot
outdoors, etc.
54
flashes on the