Belkin OMNIVIEW F1DA208Z User Manual page 28

Using your PRO3 KVM Switch
The default administrator name and password are:
User name: admin
Password: belkin
The adminstrator must go into the OSD and create a new USER account to
allow access to the second console. You may record the new user name and
password below:
User Name
Note: The administrator will always be given priority access to ports.
For example, if a user is on port 3, and then the administrator switches to port
3, the administrator will take control of that port. The user screen will then
go black and display the notification message that the adminstrator has
taken over.
Access List
This feature allows you to discretely specify the user access at a port level.
Only the administrator can set up the access list. The column on the left lists
the port names. The users are listed by their number (1 to 8). Navigate to the
user and port, and press the "Enter" key to enable/deny the access right for
each user and port combination. "X" represents access is denied and "O"
represents access is enabled.
Note: User name and password fields cannot be left blank. If two identical
user names are entered, the first user-name password will apply.
Password
1
2
3
4
5
6
7
8
26