Table of Contents
Advertisement
Installation
Powering Up the Systems
Verify that all servers connected to the PRO3 KVM Switch are powered on.
If any connected servers have not been powered on, it is okay to do so at
this time (servers can be powered on simultaneously). The PRO3 KVM Switch
emulates both a mouse and keyboard on each port and allows your server to
boot normally.
The server connected to Port "1" will be displayed on the monitor. Check that
the keyboard, monitor, and mouse are working normally. Check all occupied
ports to verify that all servers are connected and responding correctly. If you
encounter an error, check your cable connections for that server and reboot. If
the problem persists, please refer to the "Troubleshooting" section in this
User Manual.
1
2
3
4
5
6
7
8
19
Advertisement
Table of Contents
