Table of Contents
Advertisement
UsInG THe Web-based adVanCed UseR InTeRfaCe
sections
table of contents
Using the Wireless Mode switch
Your Router can operate in four different wireless modes: "g and b", "g
only", "b only", and "off"� The different modes are explained (below)�
g and b Mode
In this mode, the Router is compatible with 802�11b and 802�11g wireless
clients simultaneously� This is the factory default mode and ensures
successful operation with all Wi-Fi-compatible devices� If you have a mix
of 802�11b and 802�11g clients in your network, we recommend setting
the Router to g and b mode� This setting should only be changed if you
have a specific reason to do so�
G Wireless Router
1
2
3
4
5
6
g only Mode
802�11g mode works with 802�11g clients only� This mode is
recommended only if you want to prevent 802�11b clients from accessing
your network� To switch modes, select the desired mode from the
"Wireless Mode" drop-down box� Then, click "Apply Changes"�
b only Mode
We recommend you DO NOT use this mode unless you have a very
specific reason to do so� This mode exists only to solve unique problems
that may occur with some 802�11b client adapters and is NOT necessary
for interoperability of 802�11g and 802�11b standards�
off Mode
This option will turn off the wireless functionality�
When to use b only Mode
In some cases, older 802�11b clients may not be compatible with 802�11g
wireless� These adapters tend to be of inferior design and may use
older drivers or technology� Switching to this mode can solve problems
that sometimes occur with these clients� If you suspect that you are
using a client adapter that falls into this category of adapters, first
check with the adapter vendor to see if there is a driver update� If there
is no driver update available, switching to b only mode may fix your
problem� Please note that switching to b only mode will decrease
802�11g performance�
47
7
8
9
10
Advertisement
Table of Contents
