Maintenance; Scheduled Maintenance; Oven Cleaning - BKI DRG-40 Installation And Operation Manual

Gas Rotisserie Oven

Scheduled Maintenance

Use the following table to help manage scheduled maintenance activities.
Frequency Performed By
Daily User

Oven Cleaning

Cleaning is not only necessary for sanitary reasons, but will increase sales appeal and maximize operating
efficiency.
1. Make sure that the rotors hubs are positioned as shown below:
ROTOR
HUBS

Maintenance

The restraining device must always be connected when the appliance is in service.
Disconnect for movement, such as servicing or cleaning. Reconnect the restraint when
oven has been returned to its normal position.
Failure to remove power from this unit before performing maintenance may cause severe
electrical shock. This unit may have more than one disconnect switch.
Part
Oven
Failure to remove power from this unit may cause severe electrical shock. This unit may
have more than one disconnect switch.
Using abrasive cleaners may damage the cabinet finish. Use only a mild soap and water
solution.
DO NOT USE OVEN CLEANER on this machine. Caustic cleaners can cause damage to
the machine.
NEVER USE A WATER HOSE OR A STEAM CLEANER TO WASH THIS UNIT.
Excess water can get into the interior of the cabinet and cause damage.
Always wear appropriate personal protection equipment during the cleaning process to
guard against possible injury from hot fluid cleaning solution.
Activity
Clean the entire Oven and lubricate gears.
17
Maintenance