All manuals and user guides at all-guides.com
WATER SUPPLY CONNECTION
=
=
BRAIDED HOSE/COPPER TUBING
CAUTION
Hot water supply line: Use minimum 3/8 O.D. copper
=
tubing or metal braided dishwasher supply line.
Temperatures required for soldering and sweating
=
will damage the dishwashers water inlet valve so
if any such operation is needed, keep the heat
source min. 7
dishwashers water inlet valve.
There should not be any sharp bends in the water
=
line that may restrict the water flow.
Teflon tape or pipe tread compound must be used
=
for sealing the connection. Before connecting the
copper water supply line to the dishwasher, flush
it with hot water to clear any foreign material
Ý
Notice :
ELECTRICAL CONNECTION
WARNING
Make sure the voltage and frequency listed on the
=
data plate correspond with the household electrical
supply. This data must correspond to prevent injury
and machine damage. Consult a qualified electrician
if in doubt.
Only connect the dishwasher to the mains when
=
all installation and plumbing work is complete.
Do not use any extension cord or portable outlet
=
device to connect the dishwasher to a power supply.
7
/
(200 mm) away from the
8