Table of Contents
Advertisement
Message
CHECK PRINTER
COMMUNICATING
PLEASE WAIT
DOCUMENT READY
DOCUMENT TOO
LONG
13-42
Frequently Asked Questions
Error Code
—
—
—
#003
Cause
The toner cartridge
in the LASER
CLASS 2060P is
defective.
The unit is
connected to an
uninterruptible
power supply
(UPS).
You tried to send a
document while the
line was being used
and memory was
full.
The document in
the Automatic
Document Feeder
(ADF) is ready for
scanning.
It took more than 32
minutes to send or
copy a document.
It took more than 32
minutes to receive a
document.
Action
1.
Reinstall the
cartridge. See
page 2-34.
2.
Unplug the
LASER CLASS
2060P, wait five
seconds, then
plug it in again.
If the display
does not change,
call for service.
Make sure the
power cord is
plugged into an AC
outlet.
Wait until the fax is
sent and try again.
Send the fax, scan
the document, or
make a copy.
Divide the
document and send
or copy each part
separately.
Contact the sender,
and have them
divide the document
and send each part
separately.
Chapter 13
Advertisement
Table of Contents
