Unit Display - Sunbeam HL858A2-LT Instruction Manual

Upper arm blood pressure monitor with voice broadcast technology
Table of Contents

Advertisement

• Rest at least 5 - 10 minutes before taking a measurement.
• To allow your blood vessels to return to the condition prior to taking the
measurement, please wait at least 3 - 5 minutes in between measurements. You may
need to adjust the wait time according to your personal physiological situation.
• We recommend you using the same arm (preferably the left arm) and measuring
around the same time each day.
• Perform measurements in a quiet and relaxed environment at room temperature.
• DO NOT move or shake the device during a measurement. Please keep quiet and do
not talk during measurements.
• This product is not suitable for:
Pregnant women
People with arrhythmias
Undergoing intravenous injection on any limb
Currently in a dialysis treatment
In pre-eclampsia condition
• For those who have had a mastectomy or lymph node clearance, it is recommended to
take a measurement on the unaffected side.
• When used among medical electronic equipment on the same limb, pressurization of
the cuff may cause temporarily malfunction to other devices.
• If you have one of the circulatory problems as arteriosclerosis, diabetes, liver disease,
kidney disease, severe hypertension, peripheral circulation, please consult your
healthcare professional before using the device.
• Blood pressure measurements taken with this device are equivalent to those obtained
by a trained observer using the cuff / stethoscope auscultation method and are within
the accuracy limits prescribed by the Standard of EN 1060-4.
• If the cuff is worn incorrectly, or the shape of the upper arm is special (for example, the
circumference of the upper arm differs largely from the circumference of the forearm),
excessive gap might occur between the arm cuff and the arm, and it might lead to
measurement errors or inaccuracies. If you have any question about the condition of
cuff wearing and/or measurement result, please consult your healthcare professional.
• The applied part is cuff.
• DO NOT use the device on infants, children, or those who cannot express their own
intention.
• To avoid accidental strangulation, keep this product away from children and DO NOT
drape tube around neck.
• The medical device should not used adjacent to or stacked with other equipment. In
case adjacent or stacked use is necessary. The medical device should be observed to
verify normal operation in the configuration in which it will be used.
4
• Consider the electromagnetic compatibility of the device (ex. power disturbance, radio
frequency interference etc.) Please use it indoor only.
• Over high frequency measurements may result in blood flow interference, which is
likely to cause uncomfortable sensations, such as partial subcutaneous hemorrhage,
or temporary numbness to your arm. In general, these symptoms should not last long.
However, if you do not recover in time, please seek your medical practitioners for help.
DEVICE OVERVIEW
PART NAMES AND PRODUCT COMPONENTS
4 AAA "LR03" (1.5V)
Alkaline Batteries
Arm cuff hole
Set button
Memory
button
Arm cuff with tube

UNIT DISPLAY

Hour : Minute
Month / Date
Average of last 3 measurements
Blood pressure unit
Low battery symbol
Pulse symbol
Heart rate detector
Heart rate
LCD Display
BP Category
indicator
5 V 1A AC/DC
adapter (optional)
START / STOP button
Systolic pressure
BP category indicator
Excessive body
motion detector
Cuff fitness detection
Diastolic pressure
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

16994

Table of Contents