Advertisement
DISPLAY MARK
Measurement in progress
Exhausting
Insufficient Pressure
DESCRIPTION OF DISPLAY MARKS
CONDITION/CAUSE
Heart mark appears during
measurement conditions and
flashes when pulse is de-
tected.
Mark flashes when power is
turned on and there is air re-
maining in the Cuff. Mark
flashes at the completion of
the measurement until ex-
haust is complete.
Measurement began, but the
pressure was insufficient.
CORRECTIVE ACTION
,
Measurement in progress; re-
main quiet.
Automatic exhaust occurs.
Set the ON/OFF Button to Off.
Set it back to ON, and then
start the measurement again
when "0" appears.
Advertisement
