Basic Settings; Overview Of The Basic Settings; Gen - Bosch SGV2ITX22E User Manual

Basic settings

You can set up your device according to your needs.

Overview of the basic settings

The basic settings depend on the equipment of your appliance.
Basic setting
Water hardness
Rinse aid dosage
Extra Dry
Signal strength
Factory setting
Factory setting (may differ depending on the device type)
1
Set extra dry
on to press.
1.
To access the device settings,
2.
press . for 3 seconds
to press.
a flashes in the display.
Choise
Scale with 4 positions
Scale with 4 positions
On
from
1
Scale with 4 positions
Put back
3.
4.
Description
Set the water hardness.
→
"Setting water softening",
Page 22
Set or switch off the
amount of rinse aid.
→ "Amount of rinse aid
set del", page 24
Switch Extra Dry on or off
for each cycle.
For improved drying results, the
temperature is increased during
the final rinse. The running time
may increase slightly.
Remark: Pay attention to
delicate items of crockery.
→ "Set extra dry",
Page 33
Control the signal strength.
→
"Audio volume of the signal
set channel", page 34
Reset changed settings
to the factory state. Initial
commissioning settings
must be specified.
→
"Restore factory setting
ten", Page 34
Just as often on
until the display.
Just as often on
the LEDs indicate the desired
value.
Basic settings NL
to press
and
clipping
press to
33