Table of Contents
Advertisement
3. Use 0 - 9 to enter the time. (Use
display format is selected).
4. Touch
to confirm.
To set the alarm:
1. Touch
and select the Set Time menu > Alarm.
2. Touch
to confirm.
3. Use
or
to select 'ON'.
4. Touch
to confirm.
5. Use 0 - 9 to enter alarm time. (Use
hour display format is selected)
6. Touch
to confirm.
NOTE:
indicates alarm is set. To turn alarm off, simply touch the
keypad. If the keypad is not touched, alarm will ring for 2 minutes and
then automatically turn off.
To change time display format:
1. Touch
and select the Set Time menu > Display Format.
2. Use
or
to select 12 / 24 hour format.
3. Touch
to confirm.
4. Use
or
to select day-month format.
5. Touch
to confirm.
PAGING THE HANDSET
•
To locate a misplaced handset, press PAGE on the base unit .
•
All of the handsets registered to the base will beep and the display
will show PAGING.
to change AM / PM if 12 hour
to change AM / PM if 12
28
Advertisement
Table of Contents
