Table of Contents
Advertisement
Generated From: Gogo LLC CMDB
2.1.
Introduction and Overview
The Cloudport connects wirelessly to Gogo Business Aviation products to provide a secure link to the Gogo
Cloud service. See Figure 2.1.
The Cloudport is compatible with the following Gogo BA products:
•
SCS with Software Version 3.0 or later that has FBO/Gogo Cloud Functionality enabled.
L3 with Software Version 3.0 or later that has FBO/Gogo Cloud Functionality enabled.
•
L5i/L5 with Software Version 3.0 or later that has FBO/Gogo Cloud Functionality enabled.
•
•
UCS with Software Version 4.4 or later that has FBO Functionality enabled.
Cloudport can be installed in hangars equipped with AC power and direct access to the internet (a dedicated
ethernet wired guest network). Cloudport can be mounted on a wall, a ceiling, or a flat surface such as a
table. For best performance, install Cloudport in a hangar with direct line of sight to the aircraft to be
serviced. If multiple aircraft are to be serviced by this device, install Cloudport high enough that all aircraft
to be serviced maintain a direct line of sight to Cloudport.
The Cloudport package contains the following:
1. Cloudport
2. Wall mounting bracket and hardware
3. Level IV power adapter DC 12V, 8.33 A, 100W
4. Ethernet cable
5. Antennas
Description and Operation,
Gogo Business Aviation confidential and proprietary
Number: D32054
Lifecycle: Production
2.0
DESCRIPTION AND OPERATION
Figure 2.1.
Gogo Cloudport Block Diagram
Section 2
Rev: A
Status Date: 02/12/2020
Page 7 of 18
D32054-A, February 2020
Status: Released
Advertisement
Table of Contents
