Table of Contents
Advertisement
Generated From: Gogo LLC CMDB
4.5.12. In the Radio frequency menu, choose either 5.0 – AVANCE or 2.4 – UCS/AVANCE.
4.5.13. In the Operating region menu, select country where hangar is located.
4.5.14. In the Radio channel menu, review notes gathered during the SSID survey above and
4.5.15. In the Location menu, select By Airport or By Region. If using By Airport, enter the four-
4.5.16. Select Save changes.
4.5.17. On aircraft LRUs that will be served by Cloudport, make sure AVANCE/UCS settings are
•
Description and Operation,
Gogo Business Aviation confidential and proprietary
Number: D32054
NOTE: Selecting 5.0 - AVANCE will allow for faster loading of content to AVANCE and
SCS products. However, only AVANCE and SCS equipment will be able to use the 5.0
GHz frequency. If this installation will service both UCS and AVANCE/SCS systems, set
frequency to 2.4 – UCS/AVANCE.
select a channel not currently in use. If no survey was performed, select Auto.
letter Airport ICAO code. If using By Region, use dropdown menus to select country and
enter city information.
as follows:
On UCS Network Configuration page, make sure FBO Services is enabled. Refer to
D17000, Section 4.5.7 and Figure 4.8 below.
Figure 4.8.
•
On AVANCE or SCS Wi-Fi Radios page, make sure Gogo Cloud Enabled checkbox
is checked. Refer to D24734, Section 6.9 and Figure 4.9 below.
Section 2
Lifecycle: Production
UCS Network Configuration Page
Rev: A
Status Date: 02/12/2020
Page 17 of 18
D32054-A, February 2020
Status: Released
Advertisement
Table of Contents
