Boot Rom Commands; Boot Rom Commands - Asus GigaX User Manual

5.1.2

Boot ROM Commands

Type "?" in the boot mode to display the valid commands list.
Table 7.

Boot ROM commands

Command
d Address [,length]
p NONE
g NONE
b O or 1 or a
s 0, 1, 2, 3
x NONE
r NONE
GigaX Series L3 Managed Switch User Guide
Parameters
Dump memory contents by
giving address and length.
Display current boot
parameters
Execute firmware, enter
CLI mode
Dual image support. You
can choose the firmware to
execute by giving a slot ID,
or use "a" for auto select.
Auto-select will execute the
most updated firmware.
This is the default setting
Set the console baud rate.
0: 9600bps
1:38400bps
2:57600bps
3:115200bps
Upload firmware to the
switch
Toggle the safe mode
Usage
When you fail in
firmware update, you
can use this command to
boot up the switch using
the old firmware.
Change it back to
auto-select mode after
successfully updating
the firmware.
You have to set up the
terminal emulator with
the same baud rate to
make the work
It is slow to update
firmware by the console
port. If you lost network
connection to switch,
you can still update
firmware in this way
When a configuration file
is corrupt or you forget
your password, use safe
mode to enter CLI mode.
Your configuration file is
lost in this mode. You
need to restore your
configuration, or
re-configure the system
Notes
81