Select the corresponding interface and configure the interface
parameters. To save any changes and make it effective
immediately, click
field you changed will update the content in the display window.
By default, Layer 3 switching is disabled. You have to create and
activate Layer 3 interface(s) before enable Layer 3 switching. Up to 32
Layer 3 interfaces can be created in this switch.
Interface "sw0" is the system interface, which is default created by the
system and cannot be removed.
Check the [Remove] checkbox and click
remove an interface from the select list.
Click
to make the setting effective. Click
the settings to current value.
GigaX Series L3 Managed Switch User Guide
. Use
Figure 17. Interfaces
to refresh the setting. The
if you want to
to refresh
39