Static Addresses - Asus GigaX User Manual

4.6.8

Static Addresses

You can add a MAC address into the switch address table. The MAC
address added by this way will not age out from the address table. We call
it static address.
MAC Address: enter the MAC address
VLAN ID: enter the VLAN ID that the MAC belongs
Port Selection: select the port which the MAC belongs
Discard: you can do packet filtering when the MAC address appears in
the packets as destination address, source address, or either of them.
Click on the
above information. Then you will see the new added entry shows in the
address window. You can remove the existed address by selecting the
entry with the mouse, then clicking on
updates the existed MAC address entries. Click
Click to refresh the settings to current value. To make the
configuration effective, please go to "save configuration" page, then click
.
52
when you create a new static MAC address by the
. The button
to save effective.