Asus P2B-L User Manual page 31

III. INSTALLATION
12. IrDA-Compliant infrared module connector (5-pin IR)
This connector supports the optional wireless transmitting and receiving infrared
module. This module mounts to a small opening on system cases that support this
feature. You must also configure the setting through "UART2 Use Infrared" in
Chipset Features Setup to select whether UART2 is directed for use with COM2
or IrDA. Use the five pins as shown on the Back View and connect a ribbon cable
from the module to the motherboard according to the pin definitions.
P2B-L/S/LS Infrared Module Connector
13. SB-LINK™ Connector (6-1 pin SBLINK)
Using Intel's PC-PCI technology, this connector allows Sound Blaster 16 com-
patibility to AWE64D (Digital) or compatible PCI audio cards, enabling users to
play Real-mode DOS games and multimedia applications.
P2B-L/S/LS SB-LINK™ Connector
ASUS P2B-L/P2B-S/P2B-LS User's Manual
Front View
+5V
(NC)
IRRX
GND
IRTX
For the infrared feature to be available,
you must connect the optional Infrared
(IrDA) module to the motherboard
SBLINK
2 1
PC/PCI Grant Sideband Signal
DGND
PC/PCI Request Sideband Signal
Serial IRQ DGND
6 5
NOTE: Pin 3 is removed to ensure the correct orientation
of the cable on it.
Back View
+5V
IRTX
(NC)
GND
IRRX
31