Asus P2B-L User Manual page 27

III. INSTALLATION
3. Parallel Printer Connector (25-pin Female)
You can enable the parallel port and choose the IRQ through "Onboard Parallel
Port" in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial print-
ers must be connected to the serial port.
4. Serial Port COM1 and COM2 Connectors (Two 9-pin Male)
The two serial ports can be used for pointing devices or other serial devices. See
"Onboard Serial Port..." in Chipset Features Setup of the BIOS SOFTWARE.
P2B-L/S/LS Serial Ports (9-pin Male)
5. RJ-45 Connector (8-pin Female)
This connector can be used to connect the onboard 32-bit 10/100 Mbps Ethernet
LAN Controller (optional) to a host or a hub.
ASUS P2B-L/P2B-S/P2B-LS User's Manual
P2B-L/S/LS Parallel Port (25-pin Female)
COM 1 COM 2
P2B-L/S/LS RJ-45 Port
27