Advertisement
Life cycle
Disposal notes
Mechanical design
4/11
Building Technologies Division
Burner controls has a designed lifetime* of 250,000 burner startup cycles which, under
normal operating conditions in heating mode, correspond to approx. 10 years of usage
(starting from the production date given on the type field). This lifetime is based on the
endurance tests specified in standard EN 298 and the table containing the relevant test
documentation as published by the European Association of Component Manufacturers
(Afecor) (www.afecor.org).
The designed lifetime is based on use of the burner controls according to the
manufacturer's Data Sheet. After reaching the designed lifetime in terms of the number of
burner startup cycles, or the respective time of usage, the burner control is to be replaced
by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery
The unit contains electrical and electronic components and must not be disposed of
together with domestic waste.
Local and currently valid legislation must be observed.
The mechanical design of the LFL1.148 corresponds to that of the standard units of the
LFL range (refer to Data Sheet N7451).
CC1N7454en
20.11.2017
Advertisement
