Advertisement
Quick Links
Advertisement
Related Manuals for Snapper SP 58V
Summary of Contents for Snapper SP 58V
- Page 1 Snapper SP 58V www.snapper.com Operator's manual 2-14 Original instructions 114114827 2018-11-08...
- Page 2 INTRODUCTION............2 OPERATION..............7 SAFETY................3 MAINTENANCE............11 ASSEMBLY..............6 TRANSPORTATION AND STORAGE......14 recommendations. Contact the engine manufacturer for a replacement manual if necessary. Before operating or servicing the unit, carefully and It is your responsibility to read and understand all safety completely read the manuals provided with the unit.
- Page 3 1. Stop the product. Product stops operating and all Battery pack is loose in Warning: rotating parts. Keep hands and Careless or incorrect use of this product can 2. Remove battery pack from product and press four battery capacity LED's flash, the powerhead and no feet clear.
- Page 4 • Make sure that parts are not damaged before you 5. Examine the blade support and blade bolt to see if 9. Lock the blade with a block of wood. Attach the This information makes the product easier to use. use the product.
- Page 5 of objects to eject in the direction of the mow position of • Move the blade onto an unthreaded part of the steel cold and risk of lightning. Doing work in bad weather • Do not use a product with damaged protective the operator.
- Page 6 If there is an error with the battery pack during pack to show the error code for the error. The LED's on away from children and not approved • Do not use a battery charger other than what is persons. specified for operation with the battery pack.
- Page 7 3. Pull the motor control handle in the direction of the 2. Install the supplied carriage bolts in the handle and 2. Attach the grass bag to the frame with the quick- handlebar. The power button starts to flash. through the handle brackets. Tighten the nuts with a action clips.
- Page 8 MAINTENANCE on page • Do daily maintenance. See 3. Remove the side discharging deflector, if installed, 3. Open the side discharge guard and install the side 2. Remove the side discharging deflector, if installed, 11 . and let the side discharge guard close. Make sure discharge deflector.