Advertisement
MAINTENANCE on page
•
Do daily maintenance. See
11 .
•
Always cut with a sharp blade for the best results. A
blade that is not sharp cuts unevenly and lets the
grass become yellow on the surface of the cut.
•
Do not cut more than 1/3 of the length of the grass.
This specially applies during dry periods. Cut first
with the cutting height set high. Then examine the
result and lower to an applicable height. If the grass
is too long, operate slowly and cut two times if
necessary.
•
For very heavy cutting, decrease the width of the cut
by making an overlap of the cut path and cutting
slowly.
•
Cut in different directions each time to prevent
stripes in the lawn.
•
Regularly hose the grass catcher with water and let
dry before use. Pores in cloth grass catchers can
become filled with dirt and dust with operation. The
grass catcher will then collect less grass.
•
The side discharging mode of your product is the
best cutting mode. If you try to cut a large quantity of
grass and the product runs poorly or has decreased
operation time, change the product to side
discharging mode for better performance and
operation time.
Rear bagging mode collects grass clippings in the grass
catcher.
Do not operate the product
without the rear door closed or the approved
grass catcher in position. Do not try to
operate the product with the rear door
removed or open.
1. Lift the rear door and put the grass catcher frame
hooks on the rear door pivot.
2. Release the rear door and put it on top of the grass
bag frame.
3. Remove the side discharging deflector, if installed,
and let the side discharge guard close. Make sure
that the side discharge door is tightly closed against
the product.
The side discharging mode of the product is the best
cutting mode for a battery powered electrical mower. If
you try to cut a large quantity of grass and experience
bogging of the motor, or have decreased operation time,
change the product to side discharging mode to
increase performance and operation time.
1. Lift the rear door and remove the grass bag, if
installed.
2. Let the rear door close. Make sure that the rear door
is tightly closed against the product.
902 - 001 - 06.11.2018
3. Open the side discharge guard and install the side
discharge deflector.
4. Let the side discharge guard close against the
deflector. Make sure that the deflector is tightly in
position before you operate the product.
The mulching mode of the product makes grass
clippings smaller. The grass clippings then fall onto the
lawn and across the grass. Mulched grass biodegrades
quickly to give nutrients for the lawn.
1. Lift the rear door and remove the grass bag, if
installed, and let the back shield close. Make sure
that the rear door is tightly closed against the
product.
902 - 001 - 06.11.2018
2. Remove the side discharging deflector, if installed,
and let the side discharge guard close. Make sure
that the side discharge door is tightly closed against
the product.
1. Put in the battery pack until you hear a click. Make
sure the battery pack is correctly installed.
2. Press the power button one time. The button
illuminates fully.
1x
Advertisement
