Table of Contents
Advertisement
36
MULTIMEDIA
D
(D
)
YNAMOMETER
YNO
Dyno Page
The system will start drawing graphs for Power
and Torque (top chart) and Engine Speed
(bottom chart). The graph will fill to the right side
of the page (based on History time selected).
Once the right side of the page is reached, the
graph will scroll with the right side always being
the most recent recorded sample.
The following options can be selected:
Pressing the STOP button will freeze the
graph. Selecting Play will clear the graph and
restart the process over.
Press the + or – buttons to change the history
of the graph. The selectable options are
"30", "60", "90", or "120" seconds. The
graph will expand or constrict depending on
the setting selected.
Select the "Gear" display setting to turn the
graph gear markers on and off for automatic
transmission vehicles only.
NOTE:
The Gear On/Off feature will only display if your
vehicle is equipped with an Automatic Trans-
mission.
DODGE DRIVE MODES — IF EQUIPPED
P
C
— I
ERFORMANCE
ONTROL
E
QUIPPED
Your vehicle may be equipped with a
Performance Control feature which allows for
coordinating the operation of various vehicle
systems depending upon the type of driving
behavior desired.
The Performance Control feature is controlled
through the Uconnect system and may be
accessed by performing any of the following:
Selecting "Performance Control" from the
"Apps" menu.
Selecting "Performance Control" from within
the Performance Pages menu.
Pressing the STP (Super Track Pack) button.
You will be able to enable, disable, and
customize the functionality of the Launch
Control and Performance Control Set-Up
features within Performance Control.
Descriptions of these features are provided
below. To access information about the
functionality of these features through the
Uconnect system, press the Info button on the
touchscreen.
F
Advertisement
Table of Contents
