Table of Contents
Advertisement
(8) Secondary IDE Connector (40-pin block): IDE1
This connector connects to the next set of Master and Slave hard disks. Follow the
same procedure described for the primary IDE connector. You may also configure two
hard disks to be both Masters using one ribbon cable on the primary IDE connector and
another ribbon cable on the secondary IDE connector.
• Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
• For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(9) SerialII-ATA Port connector:
SATAII1 / SATAII2 / SATAII3 / SATAII4
This connector supports the provided Serial ATA and Serial ATA2 hard disk cable to
connect the motherboard and serial ATA hard disk.
(10) D-Sub 15-pin Connector: VGA
VGA is the 15-pin D-Subminiature female connector; it is for the display devices, such
as the CRT monitor, LCD monitor and so on.
IDE1
IDE1
Pin 1
Primary IDE Connector
Serial-ATAII 1, 2, 3, 4 Compatible Connectors
9
SATA4
SATA3
SATA2
SATA1
Advertisement
Table of Contents
