Grundig 32 GFB 5622 Service Manual page 37

OPERATION USING EXTERNAL DEVICES
Hi-fi system/AV receiver
Connecting the hi-fi system/
AV receiver
1 Connect the Optic Out socket on the
television to the corresponding socket of the
device with an optical digital cable (digital
audio signal).
Setting the audio format
You can select whether the audio signal output
via the Optic Out socket should be in the PCM
or AC2 format.
1 Open the menu with »MENU«.
2
Select the menu item »SOUND SETTINGS«
with » V « or » Λ « and press »OK« to
confirm.
– The »SOUND SETTINGS« menu appears.
3 Select »Audio Output Setup« with » « or
V
» Λ « and press »OK« to confirm.
– The menu appears.
4 Select the line »Optic Out« with » « or
V
» «.
Λ
5 Select the preferred audio format (»PCM«
< >
or »Auto«) with » « or » «.
Note:
If you wish to output the audio only via a
7
multi-channel amplifier/AV receiver, set the
option »TV Speaker« to »Off« in the menu.
6 Press »MENU« to end the setting.
------------------------
Playing the audio signal via the
HiFi system
U
1 Connect the socket on the television to
the corresponding socket of the AV receiver
with an cable (digital audio signal).
Note:
If this function is not activated, the audio
7
signal is transmitted to the HiFi system/
U
AV receiver (connected to 3.5 mm ø jack
plug) into the headphone socket on the left
side of the television.
1 Open the menu with »MENU«.
2 Select the menu item »SOUND SETTINGS«
with » V « or » Λ « and press »OK« to
confirm.
– The »SOUND SETTINGS« menu appears.
3 Select »Audio Output Setup« with » « or
V
» « and press »OK« to confirm.
Λ
– The menu appears.
4
Select the line »Audio Out« with » V « or
< >
» Λ « and press » « or » « to activate the
audio output (»Line Out«).
5 Select the line » Audio Out Status« with
» « or » « and select the option »Fixed«
V Λ
< >
or »Adjustable« with » « or » «.
Notes:
If you select »Adjustable«, the volume can
7
be changed in the menu option » Audio
Out Volume«.
If the audio should only be output via the
7
HiFi system/AV receiver, select the option
<
»Off« in the line »TV Speaker with » « or
>
» «.
6 Press »MENU« to end the setting.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
51
ENGLISH
OPERATION WITH A COMMON INTERFACE
What is a Common Interface?
Common Interface (CI) is an interface for
7
DVB receivers.
Encrypted channels can only be viewed
7
with a CA module suitable for the encryp-
tion system and in conjunction with the
corresponding smart card.
The television set is equipped with a Com-
7
mon Interface slot into which CI modules
from various providers can be inserted.
You can insert the provider's smart card
7
into the CA module in order to enable the
encrypted channels you wish to view.
Inserting the CA module
Note:
Switch the device off before you insert a
7
CA module into the »CI« slot.
1 Insert the corresponding smart card into the
CI module.
2 Insert the CI module with the smart card into
the »CI« slot on the television.
Notes:
In the »CA Module« sub-menu you can see
7
which CA module has been inserted in the
CI slot.
If you are inserting a CA module into the
7
CI slot of the television for the first time,
you will need to wait a moment until the
CA module is detected.
52
ENGLISH
--------------
SERVICE
SATELLITE ANT-IN Optic Out USB2 HDMI2
max. 500mA 13/18V max. 50mA 5V
Access control for CI module and
smart card
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
with » « or » « and press »OK« to
V Λ
confirm.
– The »SOURCE SETUP« menu appears.
3
Select the line »CA-Module« with » V « or
» « and press »OK« to confirm.
Λ
Notes:
This menu provides operating instructions
7
and – after you enter your PIN code – ac-
cess to the PAY-TV provider's channels.
The remaining settings are described in the
7
operating manuals for your CI module and
smart card.
The CA modul is not supported in certain
7
countries and regions; please consult your
authorised dealer.
4 Press »MENU« to end the setting.