Using Inserts - Alesis MICROVERB 4 Reference Manual

Mono In - Stereo Out. If you only want to feed the MicroVerb 4 a mono input, but
wish to connect both of its outputs back to the mixer, you will need three 1/4" audio
cables. Connect a mono cord from an effect send to the [LEFT] input of the
MicroVerb 4, another mono cord from the [LEFT] output of the MicroVerb 4 to an
effect return or other mixer input, and another mono cord from the [RIGHT] output of
the MicroVerb 4 to an adjacent effect return or mixer input.
AUX SEND 1
MIXER
Stereo In - Stereo Out. This connection is similar to the one described above.
However, by utilizing two sends from the mixer, we add one more cord and can now
send a stereo signal to the MicroVerb 4's inputs. For example, if you connected
sends 3 and 4 to the [LEFT] and [RIGHT] inputs, and had a stereo instrument (such
as a keyboard) connected to two channel inputs of the mixer (either one panned hard
left and hard right), you would send the left channel to send 3 and the right channel to
send 4. This is especially useful on the Dual Send Programs, #90-99 and 190-199.
AUX SEND 1
MIXER

Using Inserts

MicroVerb 4 Reference Manual
LEFT/MONO INPUT
INPUT MIX
AUX RETURNS OR INPUT CHANNELS
LEFT/MONO INPUT
INPUT MIX
AUX SEND 2
AUX RETURNS OR INPUT CHANNELS
Connections – Chapter 2
OUTPUT DUAL CHANNEL PARRELL PROCESSOR
CLIP
-6dB STORE
-12dB
BANK
-32dB
MIDI
00-99 PRESET 100-199 USER
L INPUT R
LEFT
OUTPUT
RIGHT INPUT
OUTPUT DUAL CHANNEL PARRELL PROCESSOR
CLIP
-6dB STORE
-12dB
BANK
-32dB MIDI
00-99 PRESET 100-199 USER
L INPUT R
LEFT
OUTPUT
RIGHT
OUTPUT
RIGHT
OUTPUT
17