Table of Contents
Advertisement
2
2. Hardware Installation
2.1 Attaching the Camera to the Stand
The SkyIPCam310 comes with a camera stand (optional), which is
equipped with a swivel ball screw head that can be attached to the
camera's bottom screw hole. Attach the camera stand to the
camera and station it for your application. There are three holes
located in the base of the camera stand allowing the SkyIPCam310
to be mounted on the ceiling or any wall securely.
2.2 Connecting the Ethernet cable
Connect an Ethernet cable to the network cable connector located
on the camera's rear panel, and then attach it to the network.
2.3 Attaching the Power Supply
Attach the external power supply to the DC power input connector
located on camera's rear panel, and then connect it to your local
power supply.
TIP: You can confirm power source is supplied from the LED indicators label Power on the
SkyIPCam310 is illuminated.
8
Advertisement
Table of Contents
