Table of Contents
Advertisement
Connecting A PC To A EYFR03 Qualifier
Items Needed – PC, Ethernet Cable, Assembly Manager Installed
1.
Connect the Ethernet cable into both the PC & Qualifier.
2.
Configure the Qualifier Network Settings
3.
Configure the PC Network Settings
1.
Go to "Menu" / "Network Setting" / "General"
1.
Configure General Menu with the following
1.
IP Address – 192.168.1.68
2.
Subnet – 255.255.255.0
3.
Gateway – 192.168.1.1
4.
DHCP - No
2.
Cycle power of the Qualifier after changing the IP
address.
1.
Configure the PC's network address to the following
1.
IP Address – 192.168.1.5
2.
Subnet – 255.255.255.0
3.
Gateway – 192.168.1.1
Page 25
Advertisement
Table of Contents
