Aiphone JK-1MED Installation And Operation Manual page 6

4
MOUNTING
Back wiring
1. Press RELEASE button
(to insert or remove the wire).
2. Insert the cable into the terminal.
Surface wiring
* When a 1-gang box is not mounted, the cable can be routed as surface wiring to the top or
bottom of the unit. Cut a cable inlet on the upper part of the unit to allow passage of the
wiring into the unit.
Wood
mounting
screws x 2
5
NAMES
JK-1MED
Play LED (red)
PLAY button
Record LED (red)
RECORD button
POWER switch
Speaker
Mounting screws x 2
JK-1MED
* To pass the cable through the back of the
unit, cut out the cable inlet.
83,5 mm
(3-5/16")
Mounting bracket
1-gang box
83,5 mm
(3-5/16")
Mounting bracket
1
2
8mm
(3/8")
PS-1820
Color LCD video monitor
Microphone
Door release LED (red)
DOOR RELEASE button
Menu LED (red)
MENU button
PAN/TILT button
ZOOM/WIDE button
ADJUST button
CALL button
Option button (*)
Transmit LED (red)
TALK button
OFF button
(*) The option button controls connected option
MONITOR button
- 6 -
PS-1810DIN/
PS-1820DIN
Mounting bracket
Din rail
1-gang box
83,5 mm
(3-5/16")
Screen brightness control
(0 ∼ 10)
Receive volume control
(0 ∼ 10)
Chime tone volume
(0 ∼ 10)
units such as turning lighting on and off and
activation of added door releases.