Operations (Security Guard Station); Calling From An Entrance Station; Door Release; Light Control - Aiphone 0311 A OI Operation Manual

3

OPERATIONS (SECURITY GUARD STATION)

3-1

Calling from an entrance station

1
When the call is from an entrance station, the call tone will ring for
approximately 10 seconds and the entrance station number will be
displayed.
2
Lift the handset to respond.
3-2

Door release

1
Press the door release button while in communication with the en-
trance station.
3-3

Light control

Turning the entrance light on (when light is installed in common area)
1
Press the light button once during calling or communication from the
entrance station.
3
When you are done talking, hang up the handset to end the call.
• Communication ends automatically after approximately 3 minutes.
With the expanded system, the display number of the entrance station
varies depending on the common line connection of the entrance sta-
tion and security guard station.
Connected to same common line: "Set number" is displayed as is
Ex.) Call from entrance station #1: "MAIN ENTRANCE: 01" is
displayed
Connected to separate common line: "Set number + 8"
Ex.) Call from entrance station #1: 1 + 8 = 9, so "MAIN EN-
TRANCE: 09" is displayed
2
Door release is activated at the entrance station.
Depending on the electric door release system that you use, door re-
lease may be active only while the door release button is pressed.
2
The outside light at the entrance will only turn on for the preset dura-
tion of time.
This function is not available if a surveillance camera is installed in the
common area.
- 9 -